Chance to Win a Holiday Holly Jewelry Kit!

No comments
Want to win a free Holiday Holly earring kit? Enter our sweepstake for your chance to win. Go to http://www.toocutebeads.com/assets/templates/bgawesome/giveaway.html and enter your email address to be entered to win. For more chances to win, you can share the contest with friends for additional entries after you enter.

Contest is only open to US residents.

No comments :

Post a Comment

New Jewelry Kit with Step by Step Video

No comments
Our latest Jewelry kit was created with a step by step video. You can find the jewelry kit Here, but even if you're not interested in this particular kit, you can pick up some cool, and interesting techniques to use.







About the kit: This Exclusive Toocutebeads.com Earring Jewelry kit has an elegant and modern design, combining Swarovski Crystal Bicones and Briolettes with genuine .925 sterling silver beads and findings.


Happy Beading

No comments :

Post a Comment

Rock Candy Leather Wrap Guide

No comments



Click here to see the kit

Featuring 8mm Swarovski top-drilled bicones, our popular rock candy jewelry kit gets a face lift for the summer. We’ve combined the classic rock candy style, with the popularity of leather!



Our Rock Candy Wrap Jewelry Kit contains all the beads, and stringing material needed to complete 1 bracelet kit. Tools, Glue, and other supplies need are sold separately.



Materials


  • 72 inches of 0.6mm knotting cord
  • 24 inches of 1.5mm leather
  • 64 8mm top drill bicones
  • 13mm button


Instructions



Slide your button on your leather and center it making the sides equal







Take your knotting cord under the leather and making it equal, now you'll begin with your square knot. You'll want your square knot to be right underneath the button.







-Take your right cord over your center cords and under your left cord, take your left cord under your center cords and up through the loop. Pull tight.

-Take your left cord over your center cords and under your left cord, take your left cord under your center cords and up through the loop. Pull tight.

Repeat each of these knots 2x



You'll first want to stiffen about an inch of each of the cords so the crystal will slide through easily.

Slide your 1st top drill on the right cord, push it all the way up, then do one square knot underneath it.







Slide your 2nd top drill on the left cord, push it all the way up, then do another square knot underneath it.







Slide on your 3rd top drill on the right side start your square knot, do not push up this bead leave it in the center of the knot and pull it tight so that the bicone is facing upwards on the bracelet.











Repeat pattern until you reach the desired length of bracelet, standard being 64.







Now you'll end with 6 square knots.







Space out about an inch on your leather and then tie it in a knot like shown.







Nip off all your extra cords and glue/burn them. (10)















No comments :

Post a Comment

Watch our latest Video on How to Make a Shamballa Necklace!

No comments
Our latest instructional video will teach you how to build our Shamballa Necklace Kit. The Kit can be found here!



This Weekend you can get the Kit for 40% OFF its retail price.  Take a look at the Promo Below!


No comments :

Post a Comment

New Colorful Columns Earring Project & Jewelry Kit

No comments



Kit Available at www.toocutebeads.com

Project Level: Intermidiate

Tools needed

  • Nipper
  • Round nose Pliers
  • Bent Nose or Chain Nose Pliers

Materials Needed for this project

  • 4 - 2" .925 Sterling Silver Eye Pins
  • 1 Pair - .925 Sterling Silver Shell Leverbacks
  • 1 Pair - 1" .925 Sterling Silver Box Chain Spacer
  • 1 Pair - 1.5" .925 Sterling Silver Box Chain Spacer
  • 1 Pair - 2" .925 Sterling Silver Box Chain Spacer
  • 8 - 3.5mm .925 Sterling Silver Open Jumprings
  • 8 - 3mm .925 Sterling Silver Seamless Round
  • 2 - 10mm .925 Sterling Silver Open Jumprings
  • 6 - Swarovski 19mm 2 Hole Column Beads

Instructions

  • Take 1 eyepin, and load one of your 3mm seamless round beads followed by your 3 19mm Swarovski column beads.
  • Load another 3mm seamless round on top.
  • Wrap your eye pin, making the opening face the same direction as the bottom of your eye pin.
  • Load a 3mm bead on your second eye pin.
  • Insert your eye pin up through all 3 of your column beads
  • Add another 3mm seamless round, and repeat your wrapping process (making sure your loop at the top, matches the loop at the bottom).



(this is how your project should look so far.)

(this is how your project should look so far.)




  • Open one of your 3.5mm jump rings
  • load your chains in the following order
    • 2mm
    • 1.5mm
    • 1mm
  • insert your jump ring into the loop at the bottom of your eyepin.





(They should be hanging like this)




  • Open another 3.5mm jump ring then take it through your chain in the following order
    • 1mm
    • 1.5mm
    • 2mm
  • insert your jump ring into the loop at the bottom of your eyepin (the opposite site to let the chains dangle).


(Make sure your curve is in the proper order)

Now comes the easy part.




  • Open your 10mm jump ring
  • Take it through the tops of your eye pins where you wrapped (tip: slightly push your eye pins towards each other. You will notice in the main photo the tops are slightly curved inward.)
  • Load your shell leverback onto the jump ring
  • Close the jump ring tightly

No comments :

Post a Comment

Original Pave Components for Flat Leather from Toocutebeads.com

No comments
Toocutebeads.com expands it's line of original pave components for Flat Leather.  Two new finishes are now available in both Pave Sliders, and Pave Clasps.  The latest finishes are bright gold and black ruthenium, and both colors add a ton of new design possibilities when combined with our wide variety of flat leather.

This weekend, during our product launch, save an additional 5% off all of our Pave Clasps and Sliders for Flat leather, making them 35% OFF their listed price with all available sale.

All products can be found at Toocutebeads.com

or you can go to the specific product sections below



Sterling Silver Plated Pave Sliders and Clasps for Flat Leather
Black Ruthenium Plated Pave Sliders and Clasps
Bright Gold Plated Pave Sliders and Clasps for Flat Leather

No comments :

Post a Comment

Cracked Agate Stretch Bracelet Video

1 comment
We've just added a new Easy Beading Project, and this one has an instructional video.  We've had a ton of requested for how to get a proper holding knot on stretch bracelets, and that's covered in this video.



If you're interested in the materials for this project, you can find them in our Easy Beading Section at Toocutebeads.com

1 comment :

Post a Comment

New 10mm Metallic Flat Leather that works great with our Pave Sliders and Clasps

No comments
We just gotten in 7 all new colors in Metallic Flat Leather. The best part is, they work great with our line of Pave Sliders for Flat Leather.


Our line of pave clasps, and sliders for flat leather have a high-polish finish with prong-set cz stones. Combine paves sliders and clasps with different colors of flat leather to make some really great color combinations.


22 x 14 x 8mm Pave Buckle Magnetic Clasp for Flat Leather - Antique Silver with Crystal


16 x 14mm Pave Cube Slider for Flat Leather - Bright Silver with Crystal


30 x 15mm Pave Infinity Slider for Flat Leather - Bright Silver with Crystal


34 x 22mm Pave Cross Slider for Flat Leather - Bright Silver with Crystal


34 x 22mm Plain Cross Slider for Flat Leather - Bright Silver


22 x 14 x 8mm Pave 2 Stripe Magnetic Clasp for Flat Leather - Bright Silver with Crystal


24mm Pave Heart Slider for Flat Leather - Bright Silver with Crystal


40 x 13mm Pave Double Bar Slider for Flat Leather - Bright Silver with Crystal


13mm Pave Button Slider for Flat Leather - Bright Silver with Crystal




Some some flat leather design ideas, check out of Get Inspired! sections

No comments :

Post a Comment